Bringing this back on topic. If anyone can see if they can get AP mode working using hostapd and the rest of the non-NetworkManager things, let me know. I am not sure if my setup is wrong, or if it is just not working.
@MoffKalast Glad you figured it out. You were probably missing allow-hotplug for the ethernet in your /etc/network/interfaces.
Rohan
Hey all,
Just an update on this. @MoffKalast has found a solution for getting AP mode working on the Raspberry Pi 4. A newer version of hostapd is needed. We are working on a backport of the version from Ubuntu Bionic.
We would still like to do some more internal testing, but if anyone needs functioning AP mode and is willing to endure some beta testing let me know.
Rohan
I found a way to update the PIGPIO. http://abyz.me.uk/rpi/pigpio/download.html this is their website, I followed method 3, my GPIOD version is v73 now. Haven’t figured out how to active AP mode.
Hi @NolanIndustry,
Thanks for the tip! We will be including an updated pigpio version for the next version of the image.
Rohan
Hello everyone, we’ve just built what should be a fully working Pi 4 image with fixed AP mode, fixed camera sudo issues, and updated pigpio: https://ubiquity-pi-image.sfo2.cdn.digitaloceanspaces.com/2020-02-10-ubiquity-xenial-lxde-raspberry-pi.img.xz
We’ll be testing it the next few days to see if everything checks out, but if anyone wants to try it themselves be my guest.
Wonderful, thank you! I will be trying it out as soon as possible!
I was searching for a precompiled image of Ubuntu and ROS Kinetic for RPi4 and came across this (as it was a pain in the ass to compile ROS from source on rasbperry).
I’ve just booted the RPI4 with the image and successfully connected it to our wifi. However, I tried disable the Wifi and connected it with a ethernet cable, but that didn’t work.
Another thing that might not corresponds to the actual image, but I wasn’t able to contact the ROS master running on my PC in the same network. However, I was able to ping the PC from the RPi4.
The following config was used:
PC - ROS MASTER
export ROS_IP=192.168.1.101
export ROS_MASTER_URI=http://192.168.1.101:11311
RPi4
export ROS_IP=192.168.1.102
export ROS_MASTER_URI=http://192.168.1.101:11311
I’ve also added each IP in each corresponding /etc/hosts file.
However, the opposite setup works, by letting the RPi4 acting as the master and the PC the slave.
Then Im able to see the rostopic list from the PC.
BR Robin
Problem solved with the communication, as I mentioned it didn’t correspond to the actual image. The problem was on my PC!
However, I would like to figure out why the ethernet doesn’t work!
Hi @r91,
Thanks for the testing. What are you trying to connect the ethernet to? I have had success with ethernet, so it might be something more subtle.
Also for the ROS master stuff, the image boots up running its own roscore. You should disable these services if you are not on a Magni. sudo systemctl disable magni-base; sudo systemctl disable roscore.
Yeah I’ve had the same problem myself. The new images seem to never quite connect to ethernet unless you completely reconfigure the networking setup. I assumed this was by design.
I have just installed the image on Pi4 and am attempting to connect to host machine running the Ubiquity Virtual Machine. I am unable to see the Pi Image from host machine’s WiFi but followed this tutorial:
is there any additional steps for the Pi4 image? I am able to start the ubiquityrobotXXXX connection using the given password but it is not being discovered by other WiFi adapters.
What do you mean by I am able to start the ubiquityrobotXXXX connection using the given password? Is the network being seen by some machines and not others?
Or do you not see the network name in the VM? Even if you don’t, as long as the host is connected and the VM is in “bridge mode” you should be able to talk to the Pi.
Rohan
From the Pi Robot side, the Wi-Fi network that comes pre-setup (ubiquityrobot38CA) is intermittent. If I reboot, it will temporarily be displayed and I am able to connect from host machine. At the moment, I successfully setup the connection between host (windows 10) and the Pi. On virtual box using the ubiquity provided ubuntu image, I have the bridged connection set up with the wireless adapter and I am unable to ssh to the Pi using the tutorial. I’ve tried
ssh ubuntu@ubiquityrobot.local
and
ssh 10.42.0.1
Thanks for fast response!
Success! I finally was able to connect, I had to sudo ssh and then deal with the ECDSA key error by deleting a key from known_host. Thanks for your help! I’m looking forward to playing with the RPi4 image.
Hey there, we successfully installed the image, on the PI4 and Networking is working 95% of the time.
But we want to use this GPS Module. We followed these instructions . We are getting some GPS message, but when we use cgps -s we are not getting anything. The timer, for the Fix doesn’t even start.
Does someone have the same GPS Module and could provide some information, if it is working on ur side?
PS:On PI3 it was working flawlessly
Hey @robson90
Could you ask your question in a new thread so that we don’t continue to pollute this thread (and blast out emails)?
I would be happy to help you in a new thread.
Thanks
Rohan
Ubiquity Robotics
YEA!
I have your image installed and I added a 5G ac wifi adapter, and one more time Yea! You did it!!
I installed ntpdate to get timing and date issues fixed and we are good to go.
Hi everyone,
I seem to be having issues upon startup logging into the pi via SSH. I have turned off the pi’s onboard wifi and connected to a local network as I will need to command multiple Pi’s and figured going through a router was the way to go. If I try after booting up the pi I always seem to get the following error.
ssh: connect to host testcar.local port 22: Connection refused
Then after a certain amount of time (roughly 5-10 minutes) I am able to log in without any issues. Does anyone have any ideas as to why this happens and how to fix it? Thank you all for your time!
can i use robot commander app for my small robot 2wd just for movement control using rpi 4 and L298 motor driver or i need to do changes if yes please suggest what changes need to be done in ros