# Ubiquity ROS Noetic Raspberry Pi Image Beta

**URL:** <https://forum.ubiquityrobotics.com/t/ubiquity-ros-noetic-raspberry-pi-image-beta/864>\
**Category:** Pi Image\
**Created:** [August 6, 2021, 12:42pm UTC](https://forum.ubiquityrobotics.com/t/ubiquity-ros-noetic-raspberry-pi-image-beta/864 "2021-08-06T12:42:03Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![rohbotics](https://forum.ubiquityrobotics.com/user_avatar/forum.ubiquityrobotics.com/rohbotics/32/222_2.png) [@rohbotics](https://forum.ubiquityrobotics.com/u/rohbotics)\
**Post date:** [August 6, 2021, 12:42pm UTC](https://forum.ubiquityrobotics.com/t/ubiquity-ros-noetic-raspberry-pi-image-beta/864/1 "2021-08-06T12:42:03Z")

</div>

Hi Everyone,

We are happy to announce that we are ready for the first public beta of our long-awaited Ubuntu 20.04 + ROS Noetic image.

You can download the beta here: [https://ubiquity-pi-image.sfo2.digitaloceanspaces.com/2021-08-06-focal.img.xz](https://ubiquity-pi-image.sfo2.digitaloceanspaces.com/2021-08-06-focal.img.xz) (~900MB)

Please note the following:

- The firmware upgrade script in ubiquity\_motor does not work, we are still in the process of the Python 3 port.
- There is no GUI installed by default, if someone figures out how to get LXQT from Lubuntu started properly please let me know.
- roscore and magni-base still start on boot, if you don’t want this please disable `roscore.service` and `magni-base.service` respectively.
- This is still an 32-bit armhf image, so ROS2 is not available over apt-get. Because raspicam/mmal support for 64-bit arm64 is still a work in progress, we decided to stick with 32 bit for now.
- The image is pretty minimal, there are probably a lot of packages that should be installed but aren’t
- Ethernet is handled by systemd-networkd instead of ifupdown. The ifupdown service is not installed, so changes /etc/network/interfaces will have no effect. This may change before the final release.
- Locales aren’t properly generated in the image build, so you will likely see many locale warnings
- pifi buttons and leds are not working at the moment.

The pifi SSID will be `pi-focalXXXX` and the wifi password is still `robotseverywhere`. The Linux login is still `ubuntu` with the password `ubuntu`.

Lets also keep all the discussion of this beta image in this thread.

Rohan  
Ubiquity Robotics

Like our work? You can send us a tip on Paypal: [tips@ubiquityrobotics.com](mailto:tips@ubiquityrobotics.com)

---

<div class="post-metadata">

**Author:** ![wildwingman](https://forum.ubiquityrobotics.com/letter_avatar_proxy/v4/letter/w/919ad9/32.png) [@wildwingman](https://forum.ubiquityrobotics.com/u/wildwingman)\
**Post date:** [August 8, 2021, 11:53pm UTC](https://forum.ubiquityrobotics.com/t/ubiquity-ros-noetic-raspberry-pi-image-beta/864/2 "2021-08-08T23:53:03Z")

</div>

I don’t know about the LXQT GUI but the lxde GUI is easy just connect to the internet and run sudo apt-get install lxde and apt-get install xinit then reboot. This is a very light version of linux so there not many programs installed.

---

<div class="post-metadata">

**Author:** ![sam\_uk](https://forum.ubiquityrobotics.com/user_avatar/forum.ubiquityrobotics.com/sam_uk/32/631_2.png) [@sam\_uk](https://forum.ubiquityrobotics.com/u/sam_uk)\
**Post date:** [October 18, 2021, 11:50am UTC](https://forum.ubiquityrobotics.com/t/ubiquity-ros-noetic-raspberry-pi-image-beta/864/3 "2021-10-18T11:50:15Z")

</div>

This doesn’t seem to boot for me on a pi4, I’ve downloaded it twice. Is Pi4 supported?

---

<div class="post-metadata">

**Author:** ![MoffKalast](https://forum.ubiquityrobotics.com/user_avatar/forum.ubiquityrobotics.com/moffkalast/32/214_2.png) [@MoffKalast](https://forum.ubiquityrobotics.com/u/MoffKalast)\
**Post date:** [October 21, 2021, 11:14pm UTC](https://forum.ubiquityrobotics.com/t/ubiquity-ros-noetic-raspberry-pi-image-beta/864/4 "2021-10-21T23:14:47Z")

</div>

Is that one of the newer rev 1.4 Pi 4 that you have there? Those need an extra kernel patch, at least they did on Xenial. It’s possible the patch hasn’t made it to this image yet, in which case you won’t be able to boot yes.

The rev 1.1 and 1.2 should be fully supported though.

---

<div class="post-metadata">

**Author:** ![anfederman](https://forum.ubiquityrobotics.com/user_avatar/forum.ubiquityrobotics.com/anfederman/32/141_2.png) [@anfederman](https://forum.ubiquityrobotics.com/u/anfederman)\
**Post date:** [November 8, 2021, 4:21pm UTC](https://forum.ubiquityrobotics.com/t/ubiquity-ros-noetic-raspberry-pi-image-beta/864/5 "2021-11-08T16:21:02Z")

</div>

Is this still our latest noetic image?

---

<div class="post-metadata">

**Author:** ![blorp](https://forum.ubiquityrobotics.com/letter_avatar_proxy/v4/letter/b/ed655f/32.png) [@blorp](https://forum.ubiquityrobotics.com/u/blorp)\
**Post date:** [November 8, 2021, 6:53pm UTC](https://forum.ubiquityrobotics.com/t/ubiquity-ros-noetic-raspberry-pi-image-beta/864/6 "2021-11-08T18:53:58Z")

</div>

Is there any planned update or roadmap for Noetic releases? We’ve been having some issues getting this running on a new project.

---

<div class="post-metadata">

**Author:** ![mjstn2011](https://forum.ubiquityrobotics.com/user_avatar/forum.ubiquityrobotics.com/mjstn2011/32/30_2.png) [@mjstn2011](https://forum.ubiquityrobotics.com/u/mjstn2011)\
**Post date:** [November 22, 2021, 2:57am UTC](https://forum.ubiquityrobotics.com/t/ubiquity-ros-noetic-raspberry-pi-image-beta/864/7 "2021-11-22T02:57:29Z")

</div>

**DO NOT UNDER ANY SITUATION DO A FIRMWARE UPGRADE USING THE NOETIC IMAGE!**

IT IS A KNOWN UNFINISHED FEATURE THAT EASILY CAN RENDER YOUR MCB DEAD!

We do say as 1st point in this thread it ‘does not work’ but we do NOT stress the deadly risk to the MCB at all when we said that point.

The image is EXPERIMENTAL. Sorry we did not make this VERY VERY clear earlier! We know it internally and have been working on it for months but it is not ready yet! Soon we hope but not yet!
