# Magni Hub Motors **URL:** \ **Category:** Uncategorized\ **Created:** [August 7, 2018, 2:02pm UTC](https://forum.ubiquityrobotics.com/t/magni-hub-motors/95 "2018-08-07T14:02:05Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![richard\_ir](https://forum.ubiquityrobotics.com/letter_avatar_proxy/v4/letter/r/f17d59/32.png) [@richard\_ir](https://forum.ubiquityrobotics.com/u/richard_ir)\ **Post date:** [August 7, 2018, 2:02pm UTC](https://forum.ubiquityrobotics.com/t/magni-hub-motors/95/1 "2018-08-07T14:02:05Z")
We have been testing the Magni and have some trouble with the wheels slipping. Our office is not the ideal environment as the floors are polished concrete but the performance is pretty bad. I was wondering how flexible the MCB is, can I use it with other 8 inch hub motors? Alternatively do you know if it’s possible to replace the rubber part of the hub motors with a tire that is both softer and has a flatter profile? Thanks ---
**Author:** ![davecrawley](https://forum.ubiquityrobotics.com/user_avatar/forum.ubiquityrobotics.com/davecrawley/32/24_2.png) [@davecrawley](https://forum.ubiquityrobotics.com/u/davecrawley)\ **Post date:** [August 8, 2018, 10:26am UTC](https://forum.ubiquityrobotics.com/t/magni-hub-motors/95/2 "2018-08-08T10:26:14Z")
In general wheel slippage issues can be ameliorated by changing the acceleration limits. I would suggest that you lower the acceleration (and perhaps the jerk) limits in the motor controller. See the motor controller documentation here: > **[GitHub - UbiquityRobotics/ubiquity\_motor: Package that provides a ROS interface for the...](https://github.com/UbiquityRobotics/ubiquity_motor)** > > Package that provides a ROS interface for the motors in UbiquityRobotics robots Most of these parameters can be dynamically set with rqt. If you would like we can get you motors with different tyres, but this is not recommended, softer tyres will make the odometery less accurate as will tyres with a wider profile. That said though we can investigate options email [contact@ubiquityrobotics.com](mailto:contact@ubiquityrobotics.com) for more information. Using non-standard brushless hub motors is also not recommended as using the wrong motor can destroy the motor-controller. Our master controller can switch 500W of power for the motors alone - let alone power supplies, computers etc. It has to do this very efficiently or the motor controller will rapidly over-heat. Our motor controller is tuned to the motors we supply and while others may work - there is no guarantee. We have tried non-standard motors which resulted in lots of magic blue smoke. ---
**Author:** ![rwbot](https://forum.ubiquityrobotics.com/letter_avatar_proxy/v4/letter/r/57b2e6/32.png) [@rwbot](https://forum.ubiquityrobotics.com/u/rwbot)\ **Post date:** [September 18, 2019, 5:32pm UTC](https://forum.ubiquityrobotics.com/t/magni-hub-motors/95/3 "2019-09-18T17:32:47Z")
Hi, I’ve been looking the code, documentation and forums for the brand and model number of the motors used but haven’t been able to find it. Could you provide me a link to the datasheet of the motors used? Thanks! ---
**Author:** ![davecrawley](https://forum.ubiquityrobotics.com/user_avatar/forum.ubiquityrobotics.com/davecrawley/32/24_2.png) [@davecrawley](https://forum.ubiquityrobotics.com/u/davecrawley)\ **Post date:** [September 24, 2019, 12:15am UTC](https://forum.ubiquityrobotics.com/t/magni-hub-motors/95/4 "2019-09-24T00:15:08Z")
Hi - the hub motors we supply are custom produced. What information do you want on the motors and I will seek to find it for you. ---
**Author:** ![rwbot](https://forum.ubiquityrobotics.com/letter_avatar_proxy/v4/letter/r/57b2e6/32.png) [@rwbot](https://forum.ubiquityrobotics.com/u/rwbot)\ **Post date:** [September 24, 2019, 7:19pm UTC](https://forum.ubiquityrobotics.com/t/magni-hub-motors/95/5 "2019-09-24T19:19:05Z")
Hi. My college team is designing a robot and came across the Magni. We were interested in purchasing motors similar in capabilities to those on the Magni. Do you sell the motors separately? If not, could you share the specs of the motors or refer us the model number of a motor with similar specs ? Thanks! ---
**Author:** ![davecrawley](https://forum.ubiquityrobotics.com/user_avatar/forum.ubiquityrobotics.com/davecrawley/32/24_2.png) [@davecrawley](https://forum.ubiquityrobotics.com/u/davecrawley)\ **Post date:** [September 28, 2019, 12:42am UTC](https://forum.ubiquityrobotics.com/t/magni-hub-motors/95/6 "2019-09-28T00:42:13Z")
Contact me on [dc@ubiquityrobotics.com](mailto:dc@ubiquityrobotics.com) and let’s talk. ---
**Author:** ![FolsomMike](https://forum.ubiquityrobotics.com/user_avatar/forum.ubiquityrobotics.com/folsommike/32/229_2.png) [@FolsomMike](https://forum.ubiquityrobotics.com/u/FolsomMike)\ **Post date:** [October 14, 2020, 9:27pm UTC](https://forum.ubiquityrobotics.com/t/magni-hub-motors/95/7 "2020-10-14T21:27:54Z")
Haven’t received a reply to my email. I need the voltage and current specs for the Hub Motors. thanks, Mike